Why is hard to convert single family house to commercial use?
Because:
1. The classification of the building is changed. Single family house is under 9.10.15. Fire resistance rating might not be required; Window size were big,;combustible construction was permitted on the exterior side walls. When it is changed to commercial use, such as office, restaurant, the classification is under 9.10.14. Non combustible construction and fire resistance rating are usually required. Window size is very limited.
2. Live load on the floor is changed. For single family house the live load is 1.9Kpa, but for other uses, it is up to 4.8Kpa. Reinforcement of the building structure is usually required.
Subscribe to:
Post Comments (Atom)
How are plans reviewed? -- #23
How are plans reviewed? -- #23 Important definition: Secondary Suite Secondary suite means a self-contained dwelling unit located in a buil...
-
Common strategies used to direct water away from building foundations #Rainwater and #snow-melt that do not drain away from a #foundation ... -
Quiz There are serious code issues in the following picture. How many can you tell based on the description below? It was one of the Winne... -
This Article indicates that handrails need to terminate in a manner that will not obstruct pedestrian travel or create a hazard. This requir...
No comments:
Post a Comment